OT Box

Ot Box is used to create the retentive cap housing inside a castable reinforcement that, once completed, will be cast in metal. This reinforcement, will be inserted into an overdenture in order to strengthen it and prevent it from breaking.

The castable reinforcement together with the OT Box can be created directly on the master model without duplication technique. It is possible to choose any type of alloy for the casting.

Ot Box guarantees an optimal result in terms of cap retention thanks to its design that, once cast, allows a correct housing of the retention coping inside it.

In this way, the cap can take full advantage of its elasticity during its insertion on the sphere, and embrace it completely once reached its working position.

PRODCUT INFO

DENTAL CLINIC

LABORATORY

PRODUCT SPECIFICATIONS

VIDEO

PRODCUT INFO

OT BOX SPECIAL - NORMAL + CONNECTORS

Ref. 058BSN

Kit contains:
• 2 OT BOX SPECIAL BARS
• 4 PLASTIC POSITIONERS
• 4 CONNECTORS

OT BOX SPECIAL - MICRO + CONNECTORS

Ref. 058BSM

Kit contains:
• 2 OT BOX SPECIAL BARS
• 4 PLASTIC POSITIONERS
• 4 CONNECTORS

OT BOX CLASSIC - NORMO + CONNECTORS

Ref. 153BCN

Kit contains:
• 2 UPPER BARS
• 2 LOWER BARS
• 4 PLASTIC POSITIONERS
• 4 CONNECTORS

OT BOX CLASSIC - MICRO + CONNECTORS

Ref. 153BCM

Kit contains:
• 2 UPPER BARS
• 2 LOWER BARS
• 4 PLASTIC POSITIONERS
• 4 CONNECTORS

DENTAL CLINIC

Titanium posts fixed on the root.

Fix the retnetive caps before taking the impression.

It is reccommended to use a very hard impresson material to grant the right position of the cap. The lab will insert the analog for the sphere.

Plaster model with sphere analog.

Plaster model with covers and sphere.

Cast reinforcement wax-up on the master model without duplication.

LABORATORY

Cast OT Box Large. The tolerance between caps and housing it is calculated to compensate possible mistakes during the different working phases of the attachment. The dentist will fix the cap directly into the mouth of the patient afterwards.

OT Box Classic. Glue together the two OT Box bars.

Use this piece as the housing.

OT Box Special.Cut the mono bar and use only the necessary part as a housing.

Model a layer of wax on the ridge and make three holes in contact with the plaster. Insert the positioning rings on the spheres.

Position the OT Box Classic or Special housings on rings. Complete the reinforcement using connectors and join the various pieces with self-polymerising resin.