Attacchi dentali e Componenti Calcinabili Prefabbricati - linea diretta 800 901172

Ot-Strategy

Logo_OT_Strategy

OT Strategy

OT STRATEGY are precision attachments.

It is important that the spheres are mounted in parallel. This will determine the greatest extent of correct function of the unit. OT STRATEGY attachments are the only attachments of this type to have a (patented) parallel support under the sphere that automatically aligns the retentive caps, an important factor for the insertion of the prosthesis. It will determine the duration of the caps and prevent the risk of wear to the spheres. The reduced dimensions of these attachments permit them to be applied in very small areas making them perfect for removable prostheses, however they must always be accompanied by adequate milling. In cases where milling is not preformed, it is advisable to use the optional STEADY accessory.

PRODCUT INFO

DENTAL CLINIC

LABORATORY

PRODUCT SPECIFICATIONS

VIDEO

PRODCUT INFO

OT STRATEGY - DUPLICATION TECHNIQUE

Ref. 098SSS

Kit contains:

• 4 PATRICI STRATEGY (2 standard, 2 lunghe)
• 2 STEADY
• 4 CAPPETTE RITENTIVE PER TECNICA DUPLICAZIONE

OT STRATEGY - STAINLESS STEEL HOUSING TECHNIQUE

Ref. 098CAL

Kit contains:

• 4 CASTABLE STRATEGY MALES (2 standard - 2 high)
• 2 CASTABLE STEADY
• 4 STAINLESS STEEL HOUSINGS
• 2 PLASTIC POSITIONERS
• 4 RETENTIVE CAPS FOR HOUSING TECHNIQUE

OT STRATEGY CAP ASSORTMENT - DUPLICATION TECHNIQUE

Ref. 047ACS

• 4 CAPS / YELLOW (extra-soft retention)
• 4 CAPS / PINK (soft retention)
• 4 CAPS / WHITE (standard retention)

OT STRATEGY CAP ASSORTMENT - STAINLESS STEEL HOUSING

Ref. 045ACS

• 4 CAPS / YELLOW (extra-soft retention)
• 4 CAPS / PINK (soft retention)
• 4 CAPS / WHITE (standard retention)

ACCESSORI

Ref. 054PLS

• 4 OT STRATEGY (high)

Ref. 154PCS

• 4 OT STRATEGY (standard retention)

Ref. 154STY

• 2 CASTABLE STEADY

Ref. 047CSDAY

• STRATEGY CAPS / YELLOW (extra-soft retention)

Ref. 047CSDSN

• STRATEGY CAPS / PINK (soft retention)

Ref. 047CSD

• STRATEGY CAPS / WHITE (standard retention)

Ref. 047CSDDR8

• STRATEGY CAPS / ACQUA (for laboratory use for duplication technique)

Ref. 047CLS

• STRATEGY CAPS / BLACK (for laboratory use only)

Ref. 045CSMAY

• STRATEGY CAPS/ YELLOW (extra-soft retention)

Ref. 045CSMSN

• STRATEGY CAPS / PINK (soft retention)

Ref. 045CSM

• STRATEGY CAPS / WHITE (standard retention)

Ref. 045CSMDR8

• STRATEGY CAPS / ACQUA (undersized internal diameter for worn sphere or 1.7mm sphere)

Ref. 045CLS

• OT STRATEGY CAPS / BLACK (for laboratory use for use with stainless steel housing)

Ref. 046CSM

• OT STRATEGY STAINLESS STEEL HOUSINGS

Ref. 101OTS

• OT STRATEGY PLASTIC POSITIONERS (for soldering stainless steel housings)

Ref. 044PPS

• 2 OT STRATEGY TRANSFER PIVOTS

STRUMENTI

Inseritore-estrattore Strategy

Ref. 486ICS

• 1 INSERTION TOOL FOR OT STRATEGY CAPS

Ot-Strategy chiave parallelometro

Ref. 75AC04

• 1 PARALLELOMETER KEY FOR OT STRATEGY CAPS

Ref. 081RCS

• 1 REAMER TOOL FOR OT STRATEGY CAPS

DENTAL CLINIC

LABORATORY

Insert the Strategy male into the mandrel and place in position with base of attachment in contact with the stone.

Strategy casting is complete with mandatory lingual milling to accept partial bracing arm.

Yellow retentive cap is placed on the sphere and model is ready for duplication.

Model is duplicated and the shape of the cap is reproduced.

The entire cap must be covered with a thin layer of wax during the frame wax-up procedure.

Insert the cap into the finished cast partial with Strategy Insertion Tool.

Frame is complete placed on model.

Finished prosthesis with yellow cap, however, higher levels of retention are available.

PRODUCT SPECIFICATIONS

VIDEO

Logo_OT_Strategy — OT Strategy

Logo_OT_Vertical-new — OT Vertical

Logo_OT_CAP-new — OT Cap

Logo_OT_UNILATERAL-new — OT Unilateral