The "Seeger" System has been designed to allow the construction of bars on implants, with passive connection.
The Seeger correct any imperfections, generated during the technical steps or phase of the attachment position. The New "Seeger" in peek connects passively the bar to the attachments and prevents from unscrewing, may also be easily extracted with the self-extracting screw in Titanium.
ELASTIC SEEGER KITKIT
Ref. 158ESA
Kit contains:
• 1 CASTABLE CYLINDER FOR SEEGER
• 1 SELF-EXTRACTING SEEGER
• 1 TITANIUM SCREW FOR SELF-EXTRACTING SEEGER
Ref. 158VAE
• 1 TITANIUM SCREW FOR SELF-EXTRACTING SEEGER
Ref. 158SAE
• 1 SELF-EXTRACTING WHITE SEEGER (for bar locking)
Ref. 158CCE
• 1 CASTABLE CYLINDER height 2,5mm (for Seeger)
Ref. 158CCAE
• 1 HIGH CASTABLE CYLINdER height 3,5mm (for Seeger)
OT EQUATOR CASTABLE KIT
Ref. 092ECQ
Kit contains:
• 2 SINGLE MALES
• 2 STAINLESS STEEL HOUSINGS
• 4 RETENTIVE CAPS (2 soft, 2 standard)
OT EQUATOR fOR IMPLANTS KIT
Ref. 130
Kit contains:
• 1 OT EQUATOR TITANIUM + TIN ABUTMENT
• 1 STAINLESS STEEL HOUSING
• 1 PROTECTIVE DISK
• 4 RETENTIVE CAPS (1 extra-soft, 1 soft, 1 standard, 1 strong)
Ref 030
• 1 OT EQUATOR TITANIUM + TIN ABUTMENT
OT EQUATOR THREADED SLEEVE SYSTEM KIT FOR BONDINGKIT
Ref. 160EQB
• 2 EQUATOR THREADED for titanium sleeve (1.6 mm thread)
• 2 THREADED SLEEVES (1.6 mm thread)
• 2 STAINLESS STEEL HOUSINGS
• 2 EQUATOR SPACERS
• 8 RETENTIVE CAPS (2 extra-soft, 2 soft, 2 standard, 2 processing)
CAPS ASSORTMENT KIT
Ref. 192ECE
Kit contains:
• 1 STAINLESS STEEL HOUSING
• 1 PROCESSING CAP
• 1 PROTECTIVE DISK
• 4 RETENTIVE CAPS (1 extra-soft, 1 soft, 1 standard, 1 strong)
Ref. 151SS
• 2 CASTABLE MALES
Ref. 140CEV
• 4 RETENTIVE CAPS - VIOLET "STRONG" 2700g
Ref. 140CET
• 4 RETENTIVE CAPS - CLEAR "STANDARD" 1800g
Ref. 140CER
• 4 RETENTIVE CAPS - PINK "SOFT" 1200g
Ref. 140CEG
• 4 RETENTIVE CAPS - YELLOW "EXTRA-SOFT" 600g
Ref. 140CEN
• 4 PROCESSING CAPS - BLACK (for laboratory use only)
Ref. 141CAE
• 2 STAINLESS STEEL HOUSINGS
Ref. 141CTE
• 2 TITANIUM HOUSINGS
Ref. 330SBE
• 1 Contenitore SMARTBOX CON CAPPETTA NERA DA LABORATORIO
Ref. 335CSB
• 4 BLACK SMARTBOX POSITIONING CAP
Ref. 039SFE2
• 1 EQUATOR THREADED 2.0mm (direct into 2mm thread)
Ref. 339SFE
• 1 EQUATOR THREAVED 1.6mm (for titanium sleeve)
Ref. 239GSF
• 1 TITANIUM SLEEVE (1.6mm thread)
Ref. 339SSE
• 1 OT EQUATOR SPACER
Ref. 144TTE
• 1 OT EQUATOR TITANIUM TRANSFER + TITANIUM SCREW
Ref. 144MTE
• 2 IMPRESSION COPINGS (for individual tray)
Ref. 044CAIN
• 2 IMPRESSION COPINGS NORMAL SIZE - OT EQUATOR (with interchangeable cap for pick up impression)
Ref. 144AE
2 LABORATORY ANALOGS
Ref. 74AC01
1 PARALLELOMETER KEY "NORMAL SIZE"
Ref. 774CHE
1 OT EQUATOR SQUARE SCREW DRIVER + HOLDER (square 1.25mm)
Ref. 774HC
• 1 OT EQUATOR INTERCHANGEABLE HOLDER
Ref. 760CE
• 1 SQUARE DRIVER CONNECTOR for torque controller contra angle (square 1,25 mm)
Ref. 185SIS
• 1 METAL INSERTION TOOL for Seeger use together with 491EC
Ref. 485IC
1 MULTIUSE CAPS INSERTER/ExTRACTOR TOOL
Ref. 491EC
• 1 MULTIUSE EXTRACTOR TOOL for caps (with hole stem holder)
Ref. 760 CRD
• 1 RATCHET TORQUE CONTROL dEVICE (for ot equator, sphero blockand flex 15/35ncm strenght - max 50ncm torque, suggested 25nc)
OT Equator titanium attachments
screwed into the implants. The
elastic seeger system will be used
to position the bar.
The cast bar in position. Insert
the PEEK elastic seeger ring into
the cylindrical space.
Using the insertion tool, push
down the PEEK elastic seeger
ring until it is fully seated.
After the elastic seeger ring has
been inserted, lock the bar into
place using the titanium locking
screw, (Torque suggested 15 Ncm)
The completed prosthesis. For best
results a reinforced superstructure
is always recommended.
In case of a future check, the
special internal design of the
PEEK seeger ring allow the
self extraction together with the
titanium locking screw
Screw the OT EQUATOR on the plaster model analogues
Place the castable red ring, followed by Laboratory Seeger (thin part down) tighten the screw cap in titanium without forcing.
Cast bar in position.
The retention of the prosthesis can be managed using different retention degrees
Normo
Ø 2.5 mm
Hex 1.3 mm
Thread 1.6mm
OT Equator Profile
Ø 2.5 mm
Square 1.2 mm
Thread 1,6mm
Micro
Ø 1.8 mm
Hex 0.8 mm
Thread 1,6mm
TREADED SLEEVE
High 2.25 mm
Width 2.2 mm
OT Bar Multiuse System OLD